Spring Sale: 5% OFF Over $89, Code: Elephant5; 10% OFF Over $149, Code:Elephant10



Yahboom Omibox Robot Kit Basic Course 3.1 Lighting the RGB

Posted by SuFiona on

Yahboom Omibox Robot Kit Basic Course 3.1 Lighting the RGB

1.Preparation

1-1. The position of the RGB lights in the robot car

1-2. Learn how to use RGB lights graphically program building blocks

1-3. Learn how to control RGB light by graphical  programming

image.png

image.png

image.png

As shown in the above picture, we circled the white square with a red wire frame. This white square is the RGB light on the Omibox. We can use the program to make different colors and brightness.

2.Learning goals

In this lesson, we will learn to light up a red RGB light on the Omibox. You can also modify the light of different colors according to the program.

3.Search for blocks

The following is the location of the building blocks required for this programming.

image.pngimage.png

image.png

image.png

4.Combine blocks

Method 1:

image.png

Method 2:

image.png

5.Experimental phenomena

After the program is uploaded, open the power of the robot. We can see that the RGB light on the 0 is lit red.

As shown below.

image.png

The code of the experiment:  1.Lighting the RGB.rar

0 comments

Leave a comment

Please note, comments must be approved before they are published