Spring Sale: 5% OFF Over $89, Code: Elephant5; 10% OFF Over $149, Code:Elephant10



Yahboom Omibox Robot Kit Basic Course 3.9 LED Matrix Static Show

Posted by SuFiona on

Yahboom Omibox Robot Kit Basic Course 3.9 LED Matrix Static Show

1.Preparation

1-1. The position of the LED matrix in the robot car

1-2. Learn how to control LED matrix of robot car by  graphically programming 

image.png

As shown in the above figure, the LED matrix of the Omibox robot consists of two dot matrixes, the No1 LED matrix on the left and the No2 LED matrix on the right.

2. Learning goals

In this lesson, we will learn to how use  LED matrix blocks and control the display static picture on the LED matrix screen.

3.Search for blocks

The following is the location of the building blocks required for this programming.

image.pngimage.png

image.pngimage.png

4. Combine blocks

The summary program is shown below:

Method1:

image.png

Method2:

image.png

5.Experimental phenomena

After the program is uploaded, open the power of the robot car,  a heart will be displayed on the LED matrix, as shown in the figure below.

image.png

The code of the experiment: 9.LED matrix static show.rar

0 comments

Leave a comment

Please note, comments must be approved before they are published