5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10

Yahboom Omibox Robot Kit Expand Course 4.1 Colorful water light

Posted by SuFiona on

Yahboom Omibox Robot Kit Expand Course 4.1 Colorful water light


1-1. The position of the RGB lights in the robot car

1-2. Learn how to use RGB lights graphically program building blocks

1-3. Learn how to control RGB light by graphical  programming




As shown in the above picture, we circled the white square with a red wire frame. This white square is the RGB light on the Omibox. We can use the program to make different colors and brightness.

2.Learning goals

In this lesson, we will learn to light up  8 RGB lights on the Omibox robot  to achieve the experimental effect of the water light.

3.Search for blocks

The following is the location of the building blocks required for this programming.




4. Combine blocks

The summary program is shown below:



5. Experimental phenomena

After the program is uploaded, open the power of the car. We can see that the 8 RGB lights on the Omibox robot are lit up in turn, which looks like water light.

image.png image.png image.png

The code of the experiment: 1.Colorful water light.rar


Leave a comment

Please note, comments must be approved before they are published