Spring Sale: 5% OFF Over $89, Code: Elephant5; 10% OFF Over $149, Code:Elephant10



Yahboom Omibox Robot Kit Expand Course 4.3 Singer with light

Posted by SuFiona on

Yahboom Omibox Robot Kit Expand Course 4.3 Singer with light

1.Preparation

1-1. The position of the RGB lights in the robot car

1-2. Learn how to use RGB lights graphically program building blocks

1-3. Learn how to control RGB light by graphical  programming

image.png

image.png

image.png

As shown in the above picture, we circled the white square with a red wire frame. This white square is the RGB light on the Omibox. We can change different colors and brightness for them by programming.

2.Learning goals

In this lesson, we will learn to swtich color of 8 RGB lights on the Omibox robot  and the buzzer will play music.

3.Search for blocks

The following is the location of the building blocks required for this programming.

image.png

4. Combine blocks

The summary program is shown below:

image.pngimage.pngimage.pngimage.pngimage.png

5.Experimental phenomena

After the program is uploaded, open teh power of the car. We can see that the robot will swicth different color of the RGB lights and play music“Two tigers”.

image.png image.png

The code of the experiment:  3.Singer with light.rar

0 comments

Leave a comment

Please note, comments must be approved before they are published