Spring Sale: 5% OFF Over $89, Code: Elephant5; 10% OFF Over $149, Code:Elephant10



Balanced Robot Arduino IDE Programming Tutorial-2.2 Arduino Compile tools

Posted by Fiona Su on

The Last Tutorial>> 2.1 Uart drive(CH340

The next Tutorial >> 3.1 Battery of Arduino Balance use precautions

Installation instructions of Arduino IDE is shown in the following picture:

1.Open setup package to find arduino-1.7.8.org-windows.exe.

image.png 

2.Double click to open the installation package arduino-1.7.8.org-windows.exe.

image.png 

3.Click I Agree.

image.png 

3. According to the default tick installation.

image.png 

4. Select the installation directory.

image.png 

5.Wait for the progress bar to complete,and operate as shown in the following figure.

image.png 

image.png 

 image.png

After the steps above, the  Arduino IDE is successfully installed.

---------------------------------------------------------------------------------------------------------------------

Use instructions of Arduino IDE is shown in the following picture:

1.Double click to open the Arduino software that is installed on the desktopimage.png.

2.In the menu bar of Arduino IDE,select the 【Tools】---【Board】--- 【Arduino Uno】.

image.png 

3.Connect the board and the computer ,select “Port”,marked with CH340 port,for example:USB-SERIAL CH340(COM6).

image.png 

4.In the menu bar of Arduino IDE,select the 【Tools】---【Port】--- select the port that the serial number displayed by the device manager just now.for example:COM6.

image.png 

5. Write programs in the blank area (or directly open.ino suffix files)

image.png 

6.Click this button to complie.

image.png 

7.Click this button to upload.

image.png 

After these steps, the program is uploaded to the development board successfully.

---------------------------------------------------------------------------------------------------------------------------------------

If you use the Arduino IDE provided by us and open it in Chinese, you need to follow the following steps to switch to English.

1.After opening the Arduino IDE, you need to click【文件】--【首选项】 in the Arduino IDE menu bar, as shown in the following figure.

image.png 

2.You need to click the editor language in the interface and select English(英语) and click “好”in the lower right corner, as shown in the following figure. You need to turn off the Arduino IDE and open it again.

image.png 

3.When you open it again and you'll find it in English, as shown in the following figure.

image.png 

Shop Yahboom Balance Robot Car Compatible with Arduino Programmable Kit Now!

0 comments

Leave a comment

Please note, comments must be approved before they are published