Summer Sale: 5% OFF Over $49, Code: Elephant5; 10% OFF Over $99, Code:Elephant10



Croco:kit sensor starter kit for micro:bit Tutorial 4.2 Fruit piano

Posted by Fiona Su on

Croco:kit sensor starter kit for micro:bit Tutorial 4.2 Fruit piano

Follow Croco:kit and master the key to the code age!
By microbit programming, you can use the alligator clip to connect the expansion board and the fruit to achieve fruit playing music.

1.Learning goals

After downloading the program, we can see the word 'Happy Birthday!' on the Micro:bit LED dot matrix. Then Micro:bit LED dot matrix display M, which is the middle tone. When we press button, can switch to L or H tone.

image.png

2.Preparation

Hardware:

  • 1 X Micro:bit Board
  • 1 X Micro USB Cable
  • 1 X Diamond breakout 
  • 8 X Fruits
  • 1 X Button module
  • 11 X Alligator clip
  • 1 X PC

Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package: https://github.com/lzty634158/Croco-Kit to program.

Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package: https://github.com/lzty634158/Croco-Kit , you can program.

image.png

!Note: S1 be set  to the ON, S2 be set  to theTOUCKKEY, and S3 to the FM.

3.Connection

image.png

image.png

4. Search for blocks

image.png

image.png

image.png

image.png

image.png

5. Combine blocks

image.png

The code of the experiment:  24.Fruit piano.rar

0 comments

Leave a comment

Please note, comments must be approved before they are published