5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10



Croco:kit sensor starter kit for micro:bit Tutorial 4.3 Smart home system

Posted by Fiona Su on

Croco:kit sensor starter kit for micro:bit Tutorial 4.3 Smart home system

1.Learning goals

After downloading the program, we can see the word 'Happy Birthday!' on the Micro:bit LED dot matrix. When the ultrasound module detects that someone is approaching, Micro:bit LED dot matrix will display a smile, opens the door and lights up RGB light at home. 

When the person walks into the house, the door will close automatically and RGB light will close, Micro:bit LED dot matrix clear screen.

image.png

2.Preparation

Hardware:

  • 1 X Micro:bit Board
  • 1 X Micro USB Cable
  • 1 X Diamond breakout 
  • 1 X RGB light module
  • 1 X Ultrasonic module
  • 11 X Alligator clip
  • 1 X Servo
  • 1 X Infrared sensor
  • 1 X PC

Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package: https://github.com/lzty634158/Croco-Kit to program.

Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package: https://github.com/lzty634158/Croco-Kit , you can program.

image.png

!Note: S1 be set  to the ON, S2 be set  to the IO, and S3 to the NC.

3.Connection

image.png

image.png

4. Search for blocks

image.png

image.png

image.png

image.png

image.png

5. Combine blocks

image.png

The code of the experiment:  25.Smart home system.rar

Buy Yahboom Croco:kit sensor starter kit for micro:bit

Tutorial

0 comments

Leave a comment

Please note, comments must be approved before they are published