Summer Sale: 5% OFF Over $49, Code: Elephant5; 10% OFF Over $99, Code:Elephant10



Croco:kit sensor starter kit for micro:bit Tutorial 4.6 Reception robot

Posted by Fiona Su on

Croco:kit sensor starter kit for micro:bit Tutorial 4.6 Reception robot

1.Learning goals

After downloading the program, we can see a heart on the Dot matrix module. 

After 2 seconds, Dot matrix module clear screen.

Then the kitten is always beckoning (that servo keeps turning), and when the infrared module detects the person coming, the Dot matrix module displays a “smile”.

image.png

2.Preparation

Hardware: 

  • 1 X Micro:bit Board
  • 1 X Micro USB Cable
  • 1 X Diamond breakout 
  • 6 X Alligator clip
  • 1 X Servo
  • 1 X Dot matrix module
  • 1 X Infrared module
  • 1 X PC

Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package: https://github.com/lzty634158/Croco-Kit to program.

Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package: https://github.com/lzty634158/Croco-Kit , you can program.

image.png

!Note: S1 be set  to the ON, S2 be set  to the IO, and S3 to the NC.

3.Connection

image.png

image.png

4. Search for blocks

image.png

image.png

image.png

image.pngimage.png

5. Combine blocks

image.png

The code of the experiment:  28.Reception robot.rar

Buy Yahboom Croco:kit sensor starter kit for micro:bit

Tutorial

0 comments

Leave a comment

Please note, comments must be approved before they are published