5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10

Microbit-Python Course 6.11 Croco:kit talk

Posted by Fiona Su on

Microbit-Python Course 6.11 Croco:kit talk

Learning goals:

This lesson learns to use Python programming to make a buzzer on Croco:Kit sound.


from microbit import *
import speech
speech.say("Hi, I'm an excellent robot from Yahboom.")
speech.say("Nice to meet you.")

Programming and downloading

1.You should open the Mu software, and enter the code in the edit window, , as shown in Figure 10-1.

Note! All English and symbols should be entered in English, and the last line must be a space.

image.png Figure 11-1

2. As shown in Figure 14-2, you need to click the Check button to check if our code has an error. If a line appears with a cursor or an underscore, the program indicating this line is wrong.


Figure 11-2

3.You need to connect the micro data cable to micro:bit and the computer, then click the Flash button to download the program to micro:bit as shown in Figure 10-3.

image.png Figure 11-3

4.After downloading the program into micro:bit, you can see a smile pattern on the Micro:bit dot matrix and make a sound: Hi, I'm an excellent robot from Yahboom. Nice to meet you.


 The code of the experiment: 11.Crocokiy talk.rar

Buy Yahboom Croco:kit sensor starter kit for micro:bit


Leave a comment

Please note, comments must be approved before they are published