In this lesson, we mainly learn how to control the color of RGB by micro:bit and Super:bit expansion board.
Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package https://github.com/lzty634158/SuperBit to program.
Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package:
https://github.com/lzty634158/SuperBit, you can program.
3.Looking for blocks
The following is the location of the building blocks required for this programming.
Control of one RGB light separately:
4.Combine building block
The summary program is shown below:
5. Experimental phenomena
After the program is successfully downloaded, the micro:bit dot matrix will display the smile pattern .The color of the RGB lights are changed every 1 seconds.
The code of the experiment: 4.Control color of RGB.rar
Yahboom Micro:bit Remote Control Building Block 5 in 1 Robot Car Kit Tutorial