5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10



Yahboom Microbit Starter Learning Kit Tutorial 1.Methods of mobile programming

Posted by Fiona Su on

First plug the battery box to power the micro:bit(Some people reflect that the power supply of the USB data line will not be connected), then downloaded micro:bit APP at APP store, and open the Bluetooth.

image.png 

IPhone operation steps:

1.Click Choose micro:bit on the first line.

2.Click on the yellow square PAIR A NEW MICRO:BIT.

3.Press the A+B+ reset button at the same time, after a row of English in the micro:bit dot matrix, click green NEXT.

4.On the mobile phone, light up the pattern on the micro:bit dot matrix.click green NEXT.

image.pngimage.png

image.png  image.png

5.According to the tips on the photo, click NEXT when you press the A key.

6.The connection is successful.

7.Back to the main interface, then we start programming, click Create Code go into programming web pages and start programming.

8.Drag the building blocks and click on the download.

image.pngimage.png

image.png image.png

9.Click to download to micro:bit and open in micro:bit.

10.Click on the blue flash and wait for the download.

11.After the random dot matrix is displayed on the dot matrix, it is downloading, and the progress bar is full after the download is completed.

12.After downloading the progress bar, you can see that micro:bit has a program that we have written in it.

image.pngimage.png  image.pngimage.png

Android  operation steps

1.First, power the microbit by battery, and the phone will have to prepare two APPs, micro:bit and Chrome.

2.Open micro:bit, click first block Connect.

3.Select the yellow square PAIR A NEW MICRO:BIT.

4.Press the A+B+ reset button at the same time, after a row of English in the micro:bit dot matrix, click green NEXT.

image.pngimage.png

image.pngimage.png 

5.Light up the pattern on the micro:bit dot matrix in your cell phone and click green NEXT.

6.The connection is successful.

image.pngimage.png 

7.Click third lines Create Code。

8.Copy the current URL after entering the browser.

9.Open the Chrome.

10.Copy the URL into the URL column, and click and save it.

image.pngimage.png

image.pngimage.png 

11.Rename it to 258 and click save.

12.Click flash and enter the burning program interface.

13.Click the program that you just saved (for example 258), and then click the blue FLASH.

14.Click OK.

image.pngimage.png

image.pngimage.png 

15.After entering the interface, you need to hold down the A+B+ reset key of micro:bit, when the micro:bit dot matrix appears in a line of English into the distribution network, the next step can be made.

16.When a random bright spot appears on the micro:bit dot matrix, it proves that it has been matched. The progress bar indicates that the program is being burned.

17.After the success of the burn, you can see the phenomenon on the micro:bit and the Flashing successful on the phone screen.

image.pngimage.pngimage.png 

Additional tips:

image.png 

Some micro:bit selects the mode of entering the password, so there are some differences in step 6.

After finishing the pattern, you need to press the A key, then enter the 6 digit pairing password displayed on the micro:bit dot matrix on the phone, and you can match it successfully.

Tutorial

Buy Yahboom Microbit Starter Learning Kit for Kids BBC Micro bit Science Set

0 comments

Leave a comment

Please note, comments must be approved before they are published