5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10



Handle Game Joystick Tutorial B.HelloBot 1.Handle gravity remote control

Posted by Fiona Su on

Handle Game Joystick Tutorial B.HelloBot 1.Handle gravity remote control

HelloBot_Handle_remote_control_gravity.rar

image.png 

How to use the handle (gravity)

1-1. If your car is basic versionyou need to download the Handle gravity control code.hex program from the Handle code folder to the mciro:bit board on the micro:bit handle and download the Basic.hex program from the Hellobot code folder to the mciro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the A and B buttons of micro:bit on the handleuntil the handle dot matrix displays 0. This means that the pairing between the car and the handle is successfulyou can remotely control them.

1-2. If your car is Clip version, you need to download the Handle gravity control code.hex program from the Handle code folder to the mciro:bit board on the micro:bit handle and download the Clip.hex program from the Hellobot code folder to the micro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the A button of micro:bit on the handle, until the handle dot matrix displays 1. This means that the pairing between the car and the handle is successful, you can remotely control them.

1-3.If your car is Lift version, you need to download the Handle gravity control code.hex program from the Handle code folder to the micro:bit board on the micro:bit handle and download the Forklift.hex program from the Hellobot code folder to the micro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the B button of micro:bit on the handleuntil the handle dot matrix displays 2. This means that the pairing between the car and the handle is successfulyou can remotely control them.

The Basic Version:

The handle is tilted forward:  the car forward

The handle is tilted backward:  the car back

The handle is tilted left:  the car turn left

(Note: the left tilt should be placed horizontally and then left tilt)

The handle is tilted right:  the car turn right

(Note: the right tilt should be placed horizontally and then right tilt)

Press the button B1:  The left lift will down

Press the button B2:  The left lift will up

Press the button B3:  The right lift will down

Press the button B4:  The right lift will up

Reset button is the restart button. 

The Clip Version:

The handle is tilted forward:  the car forward

The handle is tilted backward:  the car back

The handle is tilted left:  the car turn left

(Note: the left tilt should be placed horizontally and then left tilt)

The handle is tilted right:  the car turn right

(Note: the right tilt should be placed horizontally and then right tilt)

Press the button B1:  The car will open clips

Press the button B3:  The car will close clips

Reset button is the restart button.

 

The Lift Version:

The handle is tilted forward:  the car forward

The handle is tilted backward:  the car back

The handle is tilted left:  the car turn left

(Note: the left tilt should be placed horizontally and then left tilt)

The handle is tilted right:  the car turn right

(Note: the right tilt should be placed horizontally and then right tilt)

Press the button B2:  The lift down

Press the button B4:  The lift up

 

Reset button is the restart button.

image.png

image.png 

Tutorial

Micro:bit Robot Control Handle Game Joystick Tutorial

  • Last Tutorial>> 
  • Next Tutorial>>

Buy Yahboom Micro:bit Robot Control Handle Game Joystick

0 comments

Leave a comment

Please note, comments must be approved before they are published