5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10



Handle Game Joystick Tutorial B.HelloBot 2.Handle joystick remote control

Posted by Fiona Su on

Handle Game Joystick Tutorial B.HelloBot 2.Handle joystick remote control

HelloBot_Handle_remote_control_joystick.rar

image.png

How to use the handle and HelloBot(joystick)

1-1. If your car is basic version, you need to download the Handle joystick control code.hex program from the Handle code folder to the mciro:bit board on the micro:bit handle and download the Basic.hex program from the Hellobot code folder to the micro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the A and B buttons of micro:bit on the handleuntil the handle dot matrix displays 0. This means that the pairing between the car and the handle is successfulyou can remotely control them.

1-2. If your car is Clip version, you need to download the Handle joystick control code.hex program from the Handle code folder to the micro:bit board on the micro:bit handle and download the Clip.hex program from the Hellobot code folder to the mciro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the A button of micro:bit on the handleuntil the handle dot matrix displays 1. This means that the pairing between the car and the handle is successfulyou can remotely control them.

1-3.If your car is Lift versionyou need to download the Handle joystick control code.hex program from the Handle code folder to the mciro:bit board on the micro:bit handle and download the Forklift.hex program from the Hellobot code folder to the mciro:bit board on the car.

After the program is downloaded, power on the car. When the handle is powered up, you need to press the B button of micro:bit on the handleuntil the handle dot matrix displays 2. This means that the pairing between the car and the handle is successfulyou can remotely control them.

The Basic Version:

Push the joystick to forward:  The car forward

Push the joystick to backward:  The car back

Push the joystick to the left:  The car turn left

Push the joystick to the right:  The car turn right

 

Press the button B1:  The car lights up the red LED

Press the button B2:  The car lights up the green LED

Press the button B3:  The car lights up the blue LED

Press the button B4:  The car lights up the yellow LED

Reset button is the restart button.

 

The Clip Version:

Push the joystick to forward:  The car forward

Push the joystick to backward:  The car back

Push the joystick to the left:  The car turn left

Push the joystick to the right:  The car turn right

 

Press the button B1:  The car will open clips

Press the button B3:  The car will close clips

Reset button is the restart button.

 

The Lift Version:

Push the joystick to forward:  The car forward

Push the joystick to backward:  The car back

Push the joystick to the left:  The car turn left

Push the joystick to the right:  The car turn right

Press the button B2:  The lift will down

Press the button B4:  The lift will up

 

Reset button is the restart button.

image.png 

image.png 

Tutorial

Micro:bit Robot Control Handle Game Joystick Tutorial

  • Last Tutorial>> 
  • Next Tutorial>>

Buy Yahboom Micro:bit Robot Control Handle Game Joystick

0 comments

Leave a comment

Please note, comments must be approved before they are published