Tumble:bit based on Micro:bit Tutorial 2.1 Play music
In this lesson, we mainly learn how to play music by micro:bit and Super:bit expansion board.
Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package https://github.com/lzty634158/SuperBit to program.
Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package:
https://github.com/lzty634158/SuperBit, you can program.
3.Looking for blocks
The following is the location of the building blocks required for this programming.
4.Combine building block
The summary program is shown below:
Note: The jumper cap needs to be connected to the P0 and Buzzer pins on the Super:bit expansion board. As shown below.
5. Experimental phenomena
After the program is successfully downloaded, the micro:bit dot matrix will display the heart pattern and play the music "Happy Birthday" once.
If you need to start over, press the reset button on the back of the micro:bit board.
- Last Tutorial>> Tumble:bit based on Micro:bit Tutorial 1.2 Methods of Graphical online programming
- Next Tutorial>> Tumble:bit based on Micro:bit Tutorial 2.2 Control RGB color