EASY plug Ultimate Starter Learning Kit Project 7: Fire extinguishing

Posted by Fiona Su on


How to blow out the fire? You might be able to use this fan module to add flavor to your own interesting projects.
Component Required
  • EASY plug control board*1
  • EASY plug Fan Motor Module*1
  • RJ11 cable*1
  • USB cable*1
Component Introduction
The fan motor module uses the L9110 driver to control the forward and reverse rotation of propeller, which can easily blow out the fire of a lighter 20cm away.
It should be connected to the double digital port with only one line, pretty convenient.
Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. Add flavor to your own interesting projects with this module. This module is commonly used for STEM class.
  • Fan diameter: 75mm
  • Interface: double digital
  • Working voltage: 5V

Connect It Up
Connect the EASY Plug fan motor module to control board using an RJ11 cable.


Upload the Code


What You Should See
Done uploading the code, the motor fan will rotate forward for 3 seconds, and then rotate reverse for 3 seconds, repeatedly.


All Tutorials

Buy >> EASY plug Ultimate Starter Learning Kit 


Leave a comment

Please note, comments must be approved before they are published