5% OFF Over $19, Code: Elephant5; 10% OFF Over $59, Code: Elephant10



EASY PLUG Super Starter Kit For Arduino Project 3: Line Tracking

Posted by Fiona Su on

Overview
If you want to build a line tracking robot, the easiest way is to use a line tracking sensor. Line following is the most basic function of smart mobile robot. We designed this new generation of line tracking sensor to be your robot's powerful copilot all the way. It will guide your robot by telling white from black quickly and accurately, via TTL signal.
Component Required:
  • EASY plug control board*1
  • EASY plug Line Tracking Sensor *1
  • EASY plug LED Module *1
  • RJ11 cable*1
  • USB cable*1
Component Introduction:

The Line Tracking Sensor can tell white from in black or black from white accurately.
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line.
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal.
  • Power supply: 5V
  • Operating current: <10mA
  • Operating temperature: 0℃~ 50℃
  • Output Level: TTL (Black for LOW output, White for HIGH output)
  • High quality connector

Connect It Up
Connect the EASY Plug Line Tracking sensor and LED module to control board using RJ11 cables.

thumb

What You Should See
Done uploading the code to board, open the serial monitor and set the baud rate to 9600, then you can see the data is printed on the monitor, and will control LED on.

thumb

thumb

thumb

All Tutorial

 Buy here>>EASY PLUG Super Starter Kit For Arduino STEM EDU

0 comments

Leave a comment

Please note, comments must be approved before they are published