Spring Sale: 5% OFF Over $89, Code: Elephant5; 10% OFF Over $149, Code:Elephant10



Robot Kit for Micro:bit Tutorial 5.5 Route plan

Posted by Fiona Su on

Robot Kit for Micro:bit Tutorial 5.5 Route plan

1.Preparation

1-1.The position of the motor on the robot car

Programming method:

Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package: https://github.com/lzty634158/Tiny-bit to program.

Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package: https://github.com/lzty634158/Tiny-bit, you can program.

As shown in the figure below, the red arrow points to the Tiny-bit motor.

2.Learning goal

2-1.Learn how to use control motor graphically program building blocks

2-2.In this lesson, we need to realize button switches four prepared routes and displays the shape of the path on the micro:bit dot matrix.

3.Search for block

The following is the location of the building blocks required for this programming.

 

 

4.Combine block

The summary program is shown below:

 

5.Experimental phenomena

The code of the experiment: 5.Route plan.rar

Running with Tiny bit Microbit Robot Tutorial:

0 comments

Leave a comment

Please note, comments must be approved before they are published