Free Shipping Over $119



Keyestudio Maker Starter Kit(MEGA 2560 R3)For Arduino Project W/Gift Box+User Manual+1602LCD+Chassis+PDF(online)+35Project+Video

Regular price $45.00

Shipping calculated at checkout.

Introduction

Want to have enormous fun? Want to DIY some projects? Want to be more creative and more imaginative? Want your child to learn science while having fun? As long as you are willing to create, dare to experience new things, have a passion  for scientific experiments, this maker kit is your best tailored choice!

Maker learning kit is a DIY kit for scientific experiments based on A.  Together with controller, sensors, electronic components, you can build different  DIY projects. It can not only enhance operational ability of teenagers, but also  develop their imagination and creativity.  Children who are into DIY can learn electronics, physics, science knowledge and  software programming while playing; teachers can use it to achieve innovative  teaching; makers can use it for design verification of product prototype.

Keyestudio UNO R3 board

Keyestudio Maker Learning Starter Kit for Arduino Starter with MEGA 2560 R3

Overview

Keyestudio Uno r3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno r3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter.
Parameters
1. Microcontroller core: AVRmega328P-PU ( Processing speed 20MIPS)
2. Working voltage: +5V
3. External input voltage:+7V~+12V(suggest)
4. External input voltage ( extremum ): +6V≤ Vin ≤ +20V
5. Digital signal I/O interface: 14 ( 6 PWM input interface)
6. Analog signal input interface: 6
7. DC I/O interface current: 40mA
8. Flash capacity: 32KB( other 2k used in hootloader)
9. SRAM static storage capacity
10. EEPROM storage capacity: 512bytes
11. Clock frequency:16MHZ

KS0082 2560 CD (1)KS0082 2560 CD (2)KS0082-3QQ20180930163809

MEGA 2560 STARTER KIT FOR ARDUINO MAKER -4MEGA 2560 STARTER KIT FOR ARDUINO MAKER -5MEGA 2560 STARTER KIT FOR ARDUINO MAKER -7MEGA 2560 STARTER KIT FOR ARDUINO MAKER -8

 
KS0082 2560 CD (6)

Shipping list

  • keyestudio Mega 2560 R3*1
  • LED - Red*10
  • LED - Yellow*10
  • LED - Blue*10
  • LED - Green*10
  • LED - RGB*2
  • 220 Ω Resistor*20
  • 100K Ω Resistor*20
  • 1K Ω Resistor*20
  • 4.7K Ω Resistor*20
  • 47K Ω Resistor*20
  • 10K Ω Resistor*20
  • 101 Ceramic Capacitor*10
  • 103 Ceramic Capacitor*10
  • 22 Ceramic Capacitor*10
  • 104 Ceramic Capacitor*10
  • 100uf16V Electrolytic Capacitor*10
  • 10uf16V Electrolytic capacitor*10
  • Button*6
  • Yellow Round Cap*3
  • Blue Round Cap*3
  • 4007 Diode*5
  • 8050 Transistor*2
  • 8550 Transistor*2
  • 1-digit 7-seg LED (small)*1
  • 4-digit 7-seg LED (small)*1
  • Dot Matrix (small)*1
  • 5V Relay*1
  • MOS (metal oxide semiconductor) tube*1
  • Crystal Oscillator*1
  • 801S Sensor*1
  • Highly Sensitive MIC*1
  • Rotary Encoder*1
  • DHT11 Temperature and Humidity*1
  • LM35 Temperature Sensor*1
  • Flame Sensor*1
  • Ball Tilt Sensor*2
  • 103 Thermistor*1
  • Photoresistor*2
  • 103 Variable Resistor*1
  • 4N35*1
  • NE555P*1
  • DS1302*1
  • 74HC595 IC*2
  • Active Buzzer*1
  • Passive Buzzer*1
  • Fan Leaf*1
  • Fan Motor*1
  • 9G Servo Motor*1
  • I2C 1602 LCD*1
  • USB Cable 1m*1
  • Breadboard Wires 1*65
  • Male to Female Dupont Line*20
  • 400-hole Breadboard*1
  • Round Head Screw M3*6MM*4
  • Chassis*1
  • Remote Control*1
  • Resistor Chip*1
  • Joystick Module*1
  • IR Receiver*1
  • PIR Motion Sensor*1
  • Button Module*1
  • TEMT6000 Sensor*1
  • Steam Sensor*1
  • Ultrasonic Sensor*1
  • Battery Case*1

Project List

  • Project 1: Hello World
  • Project 2: LED Blinking
  • Project 3: Breathing LED
  • Project 4: PWM Light Control
  • Project 5: Traffic Light
  • Project 6: LED Chasing Effect
  • Project 7: Button-controlled LED
  • Project 8: Responder
  • Project 9: Passive Buzzer
  • Project 10: Photo Resistor
  • Project 11: Flame Sensor
  • Project 12: Analog Temperature (Thermistor)
  • Project 13: A Cup with Temperature Indicator
  • Project 14: Magical Light Cup
  • Project 15: Vibration Switch
  • Project 16: Sound-control Light
  • Project 17: Voltmeter
  • Project 18: Rotary Encoder
  • Project 19: 5V Relay
  • Project 20: Mos Tube Driving Motor
  • Project 21: NE555 Timer
  • Project 22: Counting Your Number
  • Project 23: Displaying Your “0”
  • Project 24: Changing Numbers
  • Project 25: DHT11 Temperature and Humidity Sensor
  • Project 26: Driving Your Servo Motor
  • Project 27: Choosing Your Favorite Color
  • Project 28: IR Remote Control
  • Project 29: 4*4 Button Module
  • Project 30: I2C 1602 LCD
  • Project 31: DS1302 Real Time Clock Module
  • Project 32: Making Your Body An Alarm Clock
  • Project 33: Getting Your Distance with Ultrasonic
  • Project 34: TEMT6000 Ambient Light Sensor
  • Project 35: Steam Sensor

Video link:

https://www.youtube.com/playlist?list=PL2K0ws7Tl3rETxZ3TwCi55Lo12mD_vAYm

Datasheet:

https://drive.google.com/open?id=1av0vdPeH7dHtTaDWPiMcWM2OM2XZA3eM