Summer Sale: 5% OFF Over $49, Code: Elephant5; 10% OFF Over $99, Code:Elephant10



Arduino UNO R3 Breadboard kit for Arduino learning set MCU starter w/ dupont wire+ LED+resistor

Regular price $34.99

Shipping calculated at checkout.

Introduction

Arduino UNO R3 Breadboard kit is a learning kit based on UNO R3 development board. It's equipped with basic elements for ARDUINO experiments, including breadboard, Dupont wires, LEDs and resistors. With this kit, you can perform simple LED experiments, such as LED blinking, LED chasing effect, etc. It is both affordable and portable for your Arduino learning.

KS0070-  (3)KS0070-  (5)

Shipping List

  • Arduino Uno R3 compatible board *1
  • Several dupont connector wires
  • 1* 9v battery cable
  • 1* USB cable
  • 400-pin Breadboard
  • 5* LED - Blue
  • 5* LED - Red
  • 5* LED - Yellow
  • 5* 10K Ω resistor
  • 5x 1K Ω resistor
  • 8x 220 Ω resistor

Project List

  • Arduino Breadboard Kit Project 1: Hello World
  • Arduino Breadboard Kit Project 2: LED Blinking
  • Arduino Breadboard Kit Project 3:Traffic Light
  • Arduino Breadboard Kit Project 4: LED Chasing Effect
  • Arduino Breadboard Kit Project 5: Button-controlled LED
  • Arduino Breadboard Kit Project 6: Responder experiment
  • Arduino Breadboard Kit Project 7: Active Buzzer
  • Arduino Breadboard Kit Project 8: Passive Buzzer
  • Arduino Breadboard Kit Project 9: RGB LED
  • Arduino Breadboard Kit Project 10: Analog Value Reading
  • Arduino Breadboard Kit Project 11: Photo Resistor
  • Arduino Breadboard Kit Project 12: Flame Sensor
  • Arduino Breadboard Kit Project 13: Analog temperature (thermistor)
  • Arduino Breadboard Kit Project 14: LM35 Temperature Sensor
  • Arduino Breadboard Kit Project 15: A cup with temperature indicator
  • Arduino Breadboard Kit Project 16: DHT11 Temperature and Humidity Sensor
  • Arduino Breadboard Kit Project 17: Tilt Switch
  • Arduino Breadboard Kit Project 18: Magical Light Cup
  • Arduino Breadboard Kit Project 19: 1-digit LED Segment Display

Microcontroller Specification

  • Microcontroller: ATmega328
  • Operating Voltage: 5V
  • Input Voltage (recommended) : 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328)
  • EEPROM: 1 KB (ATmega328)
  • Clock Speed: 16 MHz
  • Length: 8.6 mm
  • Width: 53.4 mm
  • Weight: 25 g

Packaging & Delivery

  • Selling Units:Single item
  • Single package size: 10X15X6 cm
  • Single gross weight:0.750 kg

For more details:

http://wiki.keyestudio.com/index.php/Ks0070_keyestudio_UNO_R3_Breadboard_Kit_for_Arduino
Video
http://www.keyestudio.com/wp/ks0070/
PDF
https://drive.google.com/open?id=1r2srrIHZjc-AXSXRVqDMpbdA30MIkJsd